InfoPrint 6500 Series User Manual page 190

Chapter 13
Complete Command List
store tn dest <DXPRN> port <PORTNUM>
Example: store tn dest d1prn port 27
Store the UDP port number of the TN server.
Default: 23
store tn dest <DXPRN> devicedesc <DEVNAME>
Example: store tn dest d1prn devicedesc MOCHA3812
Store the name of the printer device. The description entered will be the
name of the printer device created on the AS/400 host for the current
session.
Default: Unconfigured (empty) description.
store tn dest <DXPRN> connect <RESOURCENAME>
Example: store tn dest d1prn connect MYRESNM
Store the resource name for the host session. The resource name must
be the same as the name of the printer device created on the host for the
session.
Default: Unconfigured (empty) resource name
store tn dest <DXPRN> msgqname <MSGQNAME>
Example: store tn dest d1prn msqqname QSYSOPR
Store the queue name to which system messages will be logged.
Default: QSYSOPR
store tn dest <DXPRN> msgqlib <MSGQLIB>
Example: store tn dest d1prn msgqlib *LIBL
Store the queue library to which system messages will be logged.
Default: *LIBL
store tn dest <DXPRN> WSCSTname <WSCSTname>
Example: store tn dest d1prn WSCSTname *NONE
Store the queue name to which system messages will be logged.
Default: *NONE
store tn dest <DXPRN> WSCSTlib <WSCSTlib>
Example: store tn dest d1prn WSCSTlib *LIBL
Store the queue library to which system messages will be logged.
Default: *LIBL
store tn dest <DXPRN> [-]autoconnect
Example: store tn dest d1prn autoconnect
Store the state of the autoconnect flag. If the autoconnect flag is enabled
the NIC tn client will attempt a connection and binding with the specified
tn host automatically on power-up. This connection sequence will be
repeated every 60 seconds until successful or the autoconnect flag is
disabled.
See "tn dest <dxprn> start | stop" command.
Default: disabled
190