InfoPrint 6500 Series User Manual page 198

Chapter 13
Complete Command List
set sysinfo label|name [<STRING>]
Example: set sysinfo name salesprinter
Set a descriptive name defined by <string> for NIC identification
purposes. This is not used in the operation of the print server in any way.
set sysinfo contact [<STRING>]
Example: set sysinfo contact Paul_Harris
Set a person or department to contact in case of print server trouble.
set sysinfo location [<STRING>]
Example: set sysinfo location salesdept
Set the physical location of the NIC. This is for identification purposes and
is not used in the operation of the print server in any way.
set sysinfo prnserial [<STRING>]
Example: set sysinfo prnserial 000123456789
Sets the printer serial number.
set sysinfo loginfo [-]sys | [-]tcp | [-]ipx | [-]spx
Example: set sysinfo loginfo -sys ipx
Set the NIC debugging information type. Usually this information includes
unexpected errors or exceptions from the print server divided into these
groups:
sys
tcp
ipx
spx
NOTE: This is not printer or job logging information.
set sysinfo logport null|prn|syslog
Example: set sysinfo logport null
Define to where the debugging information should be sent. This can be
sent to an output device off of the NIC I/O port or to a central TCP/IP host
running a SYSLOG daemon. To set this host, use the command
sysinfo syslog hostIPaddress
set sysinfo smtp <IPaddress> [port <PORTNUM>]
Example: set sysinfo smtp 192.75.11.5 port 25
Define the SMTP (Simple Mail Transfer Protocol) server IP address or
domain name and port number where the mail is stored on your network.
Default: Unconfigured, 25
set sysinfo email <EMAIL>
Example: set sysinfo email JohnDoe@Printronix.com
Define the user email address to receive printer and job logging
information from a particular logpath on the NIC. Email name is the host
or IP name of the user.
Default: Unconfigured
198
General system messages
TCP stack messages
IPX stack messages
SPX stack messages
.
set