InfoPrint 6500 Series User Manual page 183

Set the key to a given value:
store ifc <IFNUM> wlan key <KEY-NUM> <HEX-KEY>|<$<STRING-
KEY>[<LENGTH>]>
<ifnum> is the interface number for the wireless interface.
<key-num> is the number identifying one of the four keys (1-4). <hex-
key> is the encryption key value for <key-num>.
The value must consist of 5 or 13 double- or quad-digit HEX numbers,
separated by colon (':') or dash ('-') characters for readability (e.g. D1C2-
B3A4-9586-7768-594A-3B2C-1D). Alpha characters are NOT case
sensitive. All zero disables encryption for <key-num>. If '$' is the first
character the remainder of the argument is treated as a literal string with
all alpha-numeric characters allowed except spaces). Key length is
inferred from the length of key-value so leading zeroes of longer keys
must be entered (not blank).
store ifc <IFNUM> wlan profile <WIFI-PROFILE>
<ifnum> is the interface number for the wireless interface.
<WIFI-PROFILE> is a value in the range of 0 to 6, where:
0 = 802.11 b only
1 = mixed 802.11g,b
2 = mixed 802.11b,g without 5.5, 11 Mbps
3 = 802.11g only
4 = test 802.11g only
5 = 802.11b only without 5.5, 11 Mbps
6 = mixed 802.11b,g with 5.5, 11 Mbps
The default profile value is 1.
Selects the 802.11 g wireless (Wi-Fi) mode in which to operate.
store ifc <IFNUM> wlan wpa disable|personal
<ifnum> is the interface number for the wireless interface.
Selects the WPA wireless security mode. The options are Disable
(default) and personal.
store ifc <IFNUM> wlan cipher tkip|aes|tkip+aes
<ifnum> is the interface number for the wireless interface.
Selects the WPA wireless security cipher setting. TKIP, AES, and
TKIP+AES are the available settings. TKIP is the default setting when
WPA is enabled.
store ifc <IFNUM> wlan passphrase <WPA PRE-SHARED KEY>
<ifnum> is the interface number for the wireless interface.
<WPA Pre-Shared Key> is the passphrase used to communicate with an
access point. The passphrase entered must be between 8 and 63 ASCII
characters long.
Store Commands
183