InfoPrint 6500 Series User Manual page 58

Chapter 3
TN5250/3270 Configuration
Device Description
(TN5250 mode) Specifies the name of the printer device for the current
configuration. The description entered will be the name of the printer device
created on the iSeries host for the current session. The name is limited to 10
characters in length, must start with an alpha character (a-z, A-Z), and contain
only alphanumeric characters and underscores.
Default: Unconfigured (empty) description
Message Queue Name
(TN5250 mode) Specifies the queue name to which system messages will be
logged.
Default: QSYSOPR
Message Queue Library
(TN5250 mode) Specifies the queue library to which system messages will be
logged.
Default: *LIBL
Device Type
By default, the device type is always set to InfoPrint.
WSCST Name
(TN5250 mode) As declared on the iSeries host for the created printer device.
Default: Unconfigured (empty) name
WSCST Library
(TN5250 mode) As declared on the iSeries host for the created printer device.
Auto Connect
Specifies whether the ethernet will automatically connect to the iSeries host.
Default: Disabled
Start/Stop Auto Connect
Specifies whether the ethernet should retry automatic connection to the
iSeries host.
Default: 'Start' if Auto Connect is currently stopped, 'Stop' if Auto Connect is
currently started.
58