Credentials Information; Status - InfoPrint 6500 Series User Manual

•
•
Key Distribution Center (KDC) Settings
•
•
•
•
•

Credentials Information

This section displays the Print Server's principal and its Kerberos ticket
credentials after the Print Server has authenticated with the Access Point.

Status

The Status menu items allow you to view the current status of both the printer
and the network. The submenu items available are as follows:
•
•
Renew Lifetime – The maximum time allowed before a new Kerberos
password is needed. If the password has not been changed within the
renew lifetime, a warning message displays in the next logon. If the renew
lifetime is zero, there is no time limit imposed on the password.
Default: 0 seconds (no limit).
Enable Kerberos Authentication – This check box is used to enable/
disable the Kerberos authentication within the Print Server. If it is
selected, the Print Server uses Kerberos to authenticate with the Access
Point during its boot up process.
Default: disabled (i.e. the check box is not selected).
KDC Port – The TCP port of the Kerberos server.
Default: 88.
KDC Name – The Kerberos server name.
Default: krbtgt
KDC Realm – The Kerberos realm in which the Kerberos server, the
Access Point, and the Print Server are operating.
Default: LOCALREALM
Clock Skew – The maximum time difference allowed between the
Kerberos server and the Print Server. This has to be the same setting in
the Access Point.
Default: 300 seconds.
Ticket Lifetime – The maximum time allowed before the Print Server is
required to get a new ticket.
Default: 43200 seconds
I/O Port - this menu item allows you to view the current status of the
printer, including the print jobs that are queued or are currently active.
Network - this menu item allows you to view the current status of the
network connection.
Credentials Information
69