InfoPrint 6500 Series User Manual page 201

WLAN
ifnum = <ifnum>
radio = <wireless-card-id>
ssid = <network name>
mode = <net-mode>
channel = <channel-num>
antenna = <antenna-type>
speed = <speed-flags>
preamble = <len-type>
pmm = <sleep-time>
defkey = <key-num>
auth = <auth-method>
user = <auth-user-name>
pass = <auth-password>
txpwr = <power>
opts = <option-list>
profile = <profile>
wpa = <wpa-mode>
encryption = <upa-icpher>
passphrase = <upa-passwords>
country = <country-code>
Status = <status>
Quality = <comms-quality>
Where:
<ifnum> is the interface number for the WLAN device.
<wireless-card-id> is a read only character string identifying the wireless card
installed.
<network name> is a 1 to 32 ASCII character string.
<net-mode> is the type of network mode of operation: "adhoc", "pseudo" or
"managed".
<channel-num> is the RF channel being used for communication.
<antenna-type> is the type of antenna ("Primary", "Auxiliary" or"Diverse").
<speed-flags> is the speeds being used for communication ([1 2 5 11], or
"auto").
<len-type> indicates the selected preamble length ("long", "short"or "default").
<sleep-time> indicates the power-save sleep-time in milliseconds.
List Commands
201