InfoPrint 6500 Series User Manual page 29

Wireless Ethernet Configuration Using The Control Panel
•
Ticket Lifetime
Sets the maximum allowable amount of time in Seconds, Minutes, Hours, or
Days that a ticket obtained from the Kerberos server is valid before getting a
new one.
•
Ticket Lifetime Units
Seconds. The range is 300-259200, and the default is 43200.
Minutes. The range is 5-4320, and the default is 720.
Hours. The range is 1-72, and the default is 12.
Days. The range is 1-3, and the default is 1.
•
Ticket Lifetime (Sec). The ticket lifetime unit in seconds. The default
is 43200.
NOTE: The submenu selected in Ticket Lifetime Units will display on the
Ticket Lifetime (SEC) menu. For example, if you select Hours, the
Ticket Lifetime (SEC) menu name will change to Ticket Lifetime (HR).
•
Renew Lifetime
Sets the maximum allowable amount of time in Seconds, Minutes, Hours, or
Days before warning that a new Kerberos password is needed.
•
Renew Lifetime Units
Seconds. The range is 0-604800, and the default is 0.
Minutes. The range is 0-10080, and the default is 0.
Hours. The range is 1-168, and the default is 0.
Days. The range is 0-7, and the default is 0.
•
Renew Lifetime (SEC)
NOTE: The submenu selected in Renew Lifetime Units will display on the
Renew Lifetime (SEC) menu. For example, if you select Days, the
Renew Lifetime (SEC) menu name will change to Renew Lifetime
(DAY).
Equivalent Wireless Ethernet Configuration Using The
Telnet Command
store ifc 2 wlan ssid <network-name>
store ifc 2 wlan mode adhoc|pseudo|managed
store ifc 2 wlan speed auto|(1 2 5 11)
store ifc 2 wlan channel default|(1-15)
store ifc 2 wlan antenna diverse|primary|aux
store ifc 2 wlan preamble default|long|short
store ifc 2 wlan pmm on|off
store ifc 2 wlan txpwr (0-100)
29