InfoPrint 6500 Series User Manual page 130

Chapter 7
Configuring On iSeries As An IPDS Printer
Device Model (MODEL)
Specify 0.
LAN attachment (LANATTACH)
Specify *IP.
Port number (PORT)
Specify 5001.
Font (FONT)
Enter an appropriate value.
Form Feed (FORMFEED)
Specify *CONT.
Activation timer (ACTTMR)
This value specifies the number of seconds that PSF waits for a printer to
respond to an activation request. If only one system is using the printer, use
the default value (170 seconds). If more than one system is using the printer,
specify *NOMAX, which causes PSF to wait indefinitely for a response to an
activation request.
Refer to "Sharing The iSeries Printer On The Network" on page 132 for more
details on parameter configuration.
Remote Location (RMTLOCNAME)
Enter the IP address or hostname of the printer.
User-Defined Object (USRDFNOBJ)
To use a PSF configuration object, specify its name and library here. This
object type must be *PSFCFG. For V3R7 and higher, a single PSF
configuration object may be referenced by multiple device descriptions, if
required.
130