InfoPrint 6500 Series User Manual page 117

Setting Up Printing For ASCII Files
3. Enter values for the following parameters:
Output Queue (OUTQ)
The name of the iSeries output queue. The name can be anything you
would like. This name is not the same as the printer internal queue name,
'd1prn'.
Remote System (RMTSYS)
Internet address of the ethernet on the printer (*INTNETADR prompts you
for this) or the hostname of the ethernet.
Remote Printer Queue (RMTPRTQ)
Default name of the network printer. Set for any of 'd1prn' through
'd8prn'. The remote printer queue name must be lowercase, entered in
single quotes.
NOTE:When the IPDS feature is installed, queue name 'd4prn' is not
available.
Writer to Autostart (AUTOSRTWTR)
Set the value to 1. This will start the Remote Writer when the queue is
created, and it automatically starts the Remote Writer after each IPL of
the iSeries and whenever STRTCP is started.
Connection Type (CNNTYPE)
Specify this value as *IP.
Destination Type (DESTTYP)
Specify *OTHER. *OTHER is a performance enhancement, in which data
is not required to be transformed again if the connection is interrupted and
allows printing of multiple copies.
Host Print Transform (TRANSFORM)
Specify this value as *YES.
117