InfoPrint 6500 Series User Manual page 61

SNMP Configuration
Current Model Settings
If disabled, the message will contain additional information including the
device description, device name and location, alert description, alert group,
alert severity level, and printer status.
Default: Disabled
Short E-mail Message Length
Specifies the maximum size of the short e-mail message. Acceptable values
are 15 to 80 characters.
Default: 80 characters
Send Test Message
provides a way to test the validity of the e-mail address/SMTP server address.
If checked, a test message will be sent to the specified e-mail address when
the submit button is pressed.
Default: All alert groups are disabled by default.
If the alert message is to be sent to a cellular phone or pager, the Short Email
Format option should be enabled. Once this option is enabled, you may
specify the maximum e-mail message length (15-80 characters). When
enabled, the message will contain the alert description, the severity level,
device description, and device name (unless the length of the message
exceeds the Short Email Message Length, in which case the message will be
truncated).
If the Short Email format is disabled, the message will contain additional
information including the device description, device name and location, alert
description, alert group, alert severity level, and printer status.
To test the validity of the e-mail address and the SMTP server address,
enable the Send Test Message option. If the Send Test Message box is
checked, a test message will be sent to the specified email address when the
submit button is pressed.
61