InfoPrint 6500 Series User Manual page 118

Chapter 6
Configuring The iSeries For Printing
Manufacturer Type (MFRTYPMDL)
NOTE: Select a manufacturer type and model. This is the name of the
a. Report printing, text only, no IGP or barcodes.
b. PGL or VGL program.
NOTE: For occasional text reports, create a printer configuration for each
Internet address (INTNETADR)
Specify the IP address of the printer.
Destination Options (DESTOPT)
Specify XAUTOQ, XAIX. XAUTOQ is a performance enhancement, in
which data is not required to be transformed again if the connection is
interrupted. XAIX allows printing of multiple copies.
118
WSCO. Select *IBM6400EP for Proprinter Emulation or *IBM6400EP
for Proprinter for Epson Emulation. Select the Manufacturer Type
Model based on the data type.
Manufacturer Type Model
Workstation customizing object = *NONE
The printer emulation must be switched to Proprinter emulation.
Be sure to save the printer emulation as the power-up configuration.
Alternate selection:
Manufacturer Type Model
Workstation Customizing Object = *NONE
Since *IBM6400EP is an Epson emulation, the printer emulation must
be also switched to Epson emulation. Be sure to save the printer
emulation as the power-up configuration.
Manufacturer Type Model
Workstation Customizing Object = QWPDEFAULT
Library
This selects a generic object that passes the data unchanged without
any escape codes to the printer. Text files will print in the currently
selected printer configuration, cpi, lpi, and form length.
report and use the [Job Select] key to select a report configuration.
= *IBM6400
= *IBM6400EP
= *WSCSTCONT132
= QSYS