InfoPrint 6500 Series User Manual page 203

list net
List all current TCP/IP network settings (e.g., IP address and subnet
mask).
list pping
List all the current periodic ping setting.
list pserver
List the current general print server settings (e.g., print server name and
Novell mode). Novell parameters are listed on ADAPTER and
WIRELESS NICs only.
list prn
List the current parallel port setting (e.g., mode).
list ptrcfg
List the printer configuration
list ptrmgmt
List the current printer management port numbers.
list snmp
List the Trap Table containing SNMP Managers.
list sysinfo
List the current NIC system information (e.g., contact name and protocol
stacks enabled).
list tcpip
List all current TCP/IP network settings (e.g., IP address and subnet
mask).
list test
List the status of output tests on the I/O ports.
list tn
List all current tn protocol settings.
list uptime
Lists how long the NIC has been up and running from the last reset.
list user
List the current user definitions (e.g., user names and types).
list var
List all pre-defined variables including any newly created ones. Any of
these defined variables can be referenced in a string by placing a "$"
before the variable name (e.g., set model m1 trailer $FF).
list dhcp
List all DHCP information for the NIC provided that DHCP is enabled.
list lpd
List the Line Printer Daemon (LPD) information, such as whether the
bytecount is enabled or disabled.
List Commands
203