InfoPrint 6500 Series User Manual page 137

Modify the TCP/IP Profile in z/OS
The TCP/IP profile contains system configuration statements used to initialize
the TCP/IP address space. Of those statements, the following are subject to
special considerations when you are printing from PSF on TCP/IP-attached
printers. Samples of these statements are printed in bold in the example
shown in Figure 42.
ACBPOOLSIZE
ADDRESSTRANSLATIONPOOLSIZE
CCBPOOLSIZE
DATABUFFERPOOLSIZE
ENVELOPEPOOLSIZE
IPROUTEPOOLSIZE
LARGEENVELOPEPOOLSIZE
RCBPOOLSIZE
SCBPOOLSIZE
SKCBPOOLSIZE
SMALLDATABUFFERPOOLSIZE
TCBPOOLSIZE
TINYDATABUFFERPOOLSIZE
UCBPOOLSIZE
KEEPALIVEOPTIONS INTERVAL 10 SENDGARBAGE FALSE ENDKEEPALIVEOPTIONS
GATEWAY
; * Network First hop
9 =
DEFAULTNET 9.99.12.254
This section contains information about the statements, the special
considerations that apply to them, and the changes they may make
necessary. If you change any of the values in the TCP/IP profile, restart TCP/
IP to pick up the changes.
For information about the TCP/IP profile and the statements described in this
section, refer to:
•
InfoPrint TCP/IP z/OS Customization and Administration Guide
•
InfoPrint TCP/IP Performance and Tuning Guide
1000
1500
150
160 32768
750
300
50
50
256
256
256
512
256
100
Linkname Packet Size
BPCLAN 2000
BPCLAN 2000
Figure 42. Modifying TCP/IP Profile
Configuration Procedure
Subnet mask Subnet value
0.255.255.0 0.99.12.0
0.255.255.0 0
137