Configuring Psf For Ipds On V5R4 And Above - InfoPrint 6500 Series User Manual

Chapter 7
Configuring On iSeries As An IPDS Printer
3. The following parameters must be specified:
a. Internet Address
NOTE: Do not use the IP address of the ethernet.
b. Line Description
c. Subnet Mask
Configuring A TCP/IP Host Table Entry
Although optional, it is recommended that you create a TCP/IP host table
entry. Add the iSeries name and the IP address of the LAN adapter to the
"Host Table Entries." Also, add the hostname and IP address of the printer to
the list. You can access the host table entries function by using the CFGTCP
command, then selecting option 10 from the menu.
You can also add entries to your host table for both the hostname and the fully
qualified network name for your system. The entry name should match the
name you configured for host and domain. For example, if your hostname is
"RCHASM03" and your domain name is "RCHLAND.INFOPRINT.COM", your
fully qualified network name is "RCHASM03.RCHLAND.INFOPRINT.COM".
In your host entry table, enter both RCHASM03 and
RCHASM03.RCHLAND.INFOPRINT.COM.

Configuring PSF for IPDS On V5R4 And Above

To configure IPDS on the iSeries, use the following commands:
•
CRTDEVPRT
•
CRTPSFCFG (Optional)
Configuring AFP with CRTPSFCFG on V5R4 and above
(Optional)
To configure the iSeries for IPDS printing:
1. At the iSeries command line, enter a command in the form:
CRTPSFCFG PSFCFG(AFP/NETPRT6500-V) IPDSPASTHR(*YES)
RLSTMR(*SEC15) TEXT('InfoPrint 6500-V NETWORK ATTACHED
PRINTER') PAGSIZCTL(*YES)
126
Internet address of the iSeries ethernet LAN adapter.
The name assigned to the iSeries line description as described in
"Developing Line Descriptions With CRTLINETH" on page 109. Each
iSeries LAN adapter will have its own line description.
The Subnet Mask for this iSeries TCP/IP interface (for example,
255.255.255.0).