Print Model Configuration - InfoPrint 6500 Series User Manual

Chapter 3

Print Model Configuration

Print Model Configuration
The print model configuration allows you to specify parameters for each print
model setting (m1, m2,...,m8). Amongst the parameters included, you can
select whether to have a banner page print with each print job or whether to
include a header and trailer string to carry out a series of sequences before or
after a print job.
Figure 16. Print Model Configuration, Model Settings
Name
Name of the model. The default model names are m1, m2, m3, m4, m5, m6,
m7, and m8.
Model Type
Define what processing (if any) will be performed on print jobs passing
through the associated destination. If set to "raw", the job will not be touched
by the network adapter.
Banner Page
Tells the ethernet interface to produce a banner page with each print job. The
type of banner page data can be text. You can also specify whether the
banner page should come at the front or the end of a print job.
52