InfoPrint 6500 Series User Manual page 158

Chapter 9
Configuration Screens
The following displays:
Mode: TN5250
Host
Port
Device Description
Message Queue Name
Message Queue Library
Device Type
WSCST Name
WSCST Library
Auto Connect
Start Auto Connect
3. Select TN3270E Mode.
The following displays:
Configuration for Print Path d2prn
Mode: TN3270
Host
host.domain.com)
Port
Resource Name
Auto Connect
Stop Auto Connect
NOTE: Changes will only take effect after you reset the InfoPrint 6500-V from
4. Enter the address of your system for the host IP address
The port address is the port configured for your telnet server. It is usualy
port 23.
The Resource name will be the printer name defined in the VTAM portion of
your Telnet server configuration. For this example use RMT3.
5. Select auto connect.
6. Go to the system page and reboot for the changes to take effect.
7. After the printer reboots, enter the command /DTCPIP, T, CONN from the
SDSF console. The following messages show that the printer is
connected.
158
Click here for TN3270 mode
ok (eg. 204.191.175.114 or
host.domain.com)
InfoPrint
Click here
Click here for TN5250 mode
ok (eg. 204.191.175.114 or
23
Click here
the System page.