InfoPrint 6500 Series User Manual page 184

Chapter 13
Complete Command List
store ifc <IFNUM> wlan country <COUNTRY-CODE>
<ifnum> is the interface number for the wireless interface.
<COUNTRY-CODE> can be one of the following 2 or 3 character strings:
US or USI (for USA, USA Indoor operation, respectively),
GB or GBI (for Great Britain, Great Britain Indoor operation), NL or NLI
(for Netherlands, Netherlands Indoor),
FR or FRI (for France, France Indoor),
DE or DEI (for Germany, Germany Indoor),
IT or ITI (for Italy, Italy Indoor)
The default country code is US.
This command is used to select the country and corresponding valid
channel settings with which the 802.11g wireless NIC can use to
communicate with an access point.
Enables or disables Kerberos for the wireless interface:
store kerberos opts [-]auth
Sets the maximum allowable amount of clock skew in seconds or minutes
that Kerberos authentication will tolerate before assuming that a Kerberos
message is invalid:
store kerberos config clockskew <CLOCK_SKEW><s|m>
The time units cannot be mixed and there must at least be one space
between the <renew_life_time> value and the time unit (s or m). The
default is 300 seconds, (i.e. five minutes). The minimum allowable value
is 60 seconds (i.e. 1 minute). The maximum allowable value is 900
seconds (i.e. 15 minutes).
NOTE: The Microsoft step-by-step Guide to Kerberos 5 (krb5 1.0)
Sets the maximum allowable ticket lifetime in seconds, minutes, hours, or
days:
store kerberos config tktlife <LIFE_TIME> <s|m|h|d>
<life_time> is between 300 seconds and 259200 seconds (3 days). The
time units cannot be mixed and there must be at least one space between
the <life_time> value and the time units (s, m, h, or d). Default value is
43200 seconds.
Sets the maximum allowable renewable lifetime in seconds, minutes, hours,
or days:
store kerberos config renewlife <RENEW_LIFE_TIME>
<s|m|h|d>
<renew_life_time> is 0 (i.e. no limit) or between 300 seconds and 604800
seconds (7 days). The time units cannot be mixed and there must be at
least one space between the <renew_life_time> value and the time unit
(s, m, h, or d). Default value is 0.
184
Interoperability recommends that your system clock be sychronized
within two minutes to the KDC system's clock. Otherwise, clock skew
errors will cause Kerberos authentication to fail. If this is the case, the
clock skew default may need to scale down to two minutes.