Current Model Settings - InfoPrint 6500 Series User Manual

Services
Define what type(s) of print services the destination will support. By default all
services are enabled.
Parameters
socket
lpd
lpsched
rprinter
pserver
netbios
ftpd
tn5250/3270
Selected Model
Defines the model configuration that is to be associated with the current
destination. The default model names are m1, m2, m3, m4, m5, m6, m7, and
m8.

Current Model Settings

Figure 14. Print Path Configuration, Current Model Settings, Model Type
Model Type
The option is available on the Print Model web page. For a description, see
page 52.
Printing to a TCP port number (e.g. 9100) on the ethernet
interface
Remote printing using the Line Printer Daemon
System V printing using the "lp" command
Novell's remote printer setup
Novell's PSERVER setup
Printing from Windows stations relying on NetBIOS over
TCP/IP
Printing using the File Transfer Protocol (FTP)
Printing using tn5250/3270 configuration
Current Model Settings
49