InfoPrint 6500 Series User Manual page 40

Chapter 3
Network Configuration
Interface
The two edit fields contain the ethernet's IP address and subnet mask. The
check boxes enable the RARP, BOOTP, DHCP, DNS, and Persist DHCP
protocols, which are alternate methods of assigning IP addresses. On most
networks, you want to enter a permanent IP address and subnet mask and
disable RARP, BOOTP, DHCP, DNS, and Persist DHCP. However, if your
network requires one of these, you should clear the IP address (and possibly
the subnet mask) fields and ensure that the appropriate check box is
selected.
Figure 7. Defining a Gateway Address for Wired Ethernet Routing
Figure 8. Defining a Gateway Address for Wireless Ethernet Routing
40