InfoPrint 6500 Series User Manual page 194

Chapter 13
Complete Command List
set model <MODEL> stty [[-]onlcr] [[-]descramble]
[xtab <1-16>|none]
Example: set model m3 stty onlcr
Control extra job processing done by the <model>. The processing
options are:
onlcr
descramble
xtab
set model <MODEL> header [<STRING>]
Example: set model m1 header 0x20
Set a header string to be sent to the printer at the start of any print jobs
passing through this <model>. The headerstring (<string>) can consist of
up to nine elements. An example element is a hexadecimal code (e.g.,
0x04) or a pre-defined variable on the print server (e.g., $FF for a
formfeed). Use list var to see all available variables. To erase the
header, send the command with no headerstring value; for example 'set
model m1 header'.
set model <MODEL> trailer [<STRING>]
Example: set model m7 trailer $FF
Set a trailer string to be sent to the printer at the end of any print jobs
passing through this <model> . The trailerstring (<string>) can consist of
up to nine elements. An example element is a hexadecimal code (e.g.,
0x04) or a pre-defined variable on the print server (e.g., $FF for a
formfeed). Use list var to see all available variables. To erase the
trailer, send the command with no trailerstring value; for example 'set
model m1 trailer'.
set model <MODEL> config [config_num]
Set a printer configuration number config_num to be loaded prior to
printing a job on the specified model. If the command is sent with
config_num set to 0, the factory configuration is loaded before the job
prints. If config_num is in the range 1 through 8, the corresponding
configuration number is loaded before the job prints. To return to the
default state where no configuration is loaded, send the command with no
config_num value; for example 'set model m1 config'. When no new
configuration is loaded, the current configuration settings will be in effect
for any jobs sent to model <model>. To see which configuration, if any,
will be loaded at the start of a job, use the command 'list model' or 'list
model <model>'.
set model from default
Set all model settings back to factory defaults.
194
Carriage return insertion for Unix text jobs. Adds
carriage returns to text jobs with solitary linefeeds. This
will prevent stair-stepped output or output running off the
right side of the page.
Automatic descrambling of print jobs passing through
which have been scrambled using Printronix proprietary
Unix scramble utility, npscramble.
Tab expansion from 1 to 16 spaces.