Chapter
2
Configuration Tools
HTML Forms
The ethernet settings can be configured over TCP/IP through a standard web
browser. The ethernet web pages provide a handy way to access some of the
commands built into the print server.
NOTE: If a router is used, make sure a Gateway value is configured.
To access the ethernet home page:
1. Make sure the print server has an IP address and Subnet Mask so it is
recognizable on your TCP/IP network.
2. Make sure your network station can successfully ping the ethernet over
the network.
3. Direct your Web browser to the URL:
http://IPaddress
(e.g., http://192.75.11.9)
where IPaddress is the IP address of your ethernet.
NOTE: If you cannot access the web page, refer to "Web Browser/HTTP
The ethernet HTML structure is divided into several menus as shown in
Figure 3.
32
Problem" on page 122