System Configuration; Security Configuration; Kerberos Configuration - InfoPrint 6500 Series User Manual

Chapter 3

System Configuration

System Configuration
The System Configuration form allows you to change the ethernet's operation
mode. Select "Reboot" to re-power the print server. Select "Default" to reset
the print server and have it come up with factory default settings.

Security Configuration

The Security Configuration form allows you to configure the ethernet's
Kerberos authentication settings and to obtain the authenticated information.
Kerberos is available only when a Symbol LA41X1 radio card is installed.

Kerberos Configuration

This section covers the configuration of Kerberos related settings. The two
configuration settings include:
•
Print Server Settings – Used to configure Kerberos settings related to
the Print Server.
•
Key Distribution Center (KDC) Settings – Used to configure the
Kerberos settings related to the Kerberos server.
Print Server Settings
•
Print Server Name – The Print Server name is used in the KDC
database and can be configured in the Administration page. If this name
is changed, the corresponding name in the KDC database must be
changed accordingly to match it.
Default: "<prod>_xxxxxx" where "xxxxxx" is the serial number or the last
six digits of the network adapter's ethernet address. "<prod>" is the
product model number (e.g. M302_01234).
68
Figure 26. System Configuration