Configuration Screens - InfoPrint 6500 Series User Manual

The next panel shows these settings for the SCS printer.
Browse
Command ==>
Printer definition name . VTAM_SCS1
Printer LU name. . . RMT2
VTAM Processing Options:
Printer logmode. . . SCS
Checkpoint pages . . 5
Send as transparent data
The last thing you need to configure is the printer.
NOTE: A this time, InfoPrint Server and all related LUs should be active.
Using the printer's web pages go to the configuration screen

Configuration Screens

1. To configure the InfoPrint 6500-V, fill out and submit the forms using the
Configuration
Network
Print Path
Print Model
Log Path
TN5250/3270
SNMP
Administration
System
2. Select the TN5250/3270 section from the configuration screen.
NOTE: Changes will only take effect after you reset the InfoPrint 6500-V from
Printer Inventory Manager As Defined With TN3270E
VTAM Protocol
following links.
Table 9. Configuration Forms
HTML Forms
TCP/IP (including Windows) and Novell network settings
Destination, Model, Log Path, and I/O port configuration
Shortcut to the print path model configuration forms
Shortcut to the print path log path configurations form
TN5250/3270 configuration settings
SNMP configuration settings
Names and passwords
System operation modes (reboot, factory defaults)
the System page.
157