11
Configuring For A *LAN 3812 SNMP Device Description
Support for SNMP is available in the base code for iSeries OS V5R4 and
above. *LAN 3812 SNMP device descriptions are similar to *LAN 3812 PJL
device descriptions, and they fully support the page range function.
Configuration Instructions
To configure a 6500-V, for SNMP system device driver program, use the
CRTDEVPRT command. The following parameters should be specified:
Device Class (DEVCLS)
This needs to be set to *LAN.
Device Type (TYPE)
This needs to be set to 3812.
Device Model (MODEL)
This needs to be set to 1.
LAN Attachment (LANATTACH)
This needs to be set to *IP.
Port number (PORT)
This needs to be set to 9100.
Font (FONT) = 011
This is typically set to 011, which is the default 10 CPI font. A font ID is
required to create the device description. Unless special requirements in your
operation dictate something different, this should suffice.
iSeries Configuration,
SNMP
167