Configuration Example; Workstation Customizing Object (Wscst) - InfoPrint 6500 Series User Manual

Chapter 11
Configuring For A *LAN 3812 SNMP Device Description

Workstation Customizing Object (WSCST)

This is typically set to *NONE, but can be used to specify a modified
workstation customer object.
All other parameters should be specified like any other printer.
NOTE: In certain situations, we recommend setting
Below is an example of the changes:
Printer Error Message ................................... *INFO
Manufacturer type and model ....................... *WSCST
Workstation customizing object..................... QWPDEFAULT
Library..................................................... *LIBL

Configuration Example

To configure a *LAN 3812 SNMP device description type CRTDEVPRT and
press the F4 (Prompt) key. The following is an example of using the Create
Device Printer (CRTDEVPRT) command to create a *LAN 3812 SNMP device
description:
CRTDEVPRT DEVD(SNMP6500-V) DEVCLS(*LAN) TYPE(3812) MODEL(1)
LANATTACH(*IP) PORT(9001) FONT(011) FORMFEED(*CONT)
TRANSFORM(*YES)MFRTYPMDL(*IBM6400)RMTLOCNAME('9.5.208.46')
USRDFNOPT(*SHRCNN) USRDRVPGM(*NONE) SYSDRVPGM(*SNMPDRV)
Create Device Desc (Printer) (CRTDEVPRT)
170
MFRTYPMDL to *WSCST,
WSCST to QWPDEFAULT/*LIBL, and
PRTERRMSG to *INFO.