Installation And Configuration; Installation; Connecting To The Network - InfoPrint 6500 Series User Manual

2

Installation

The ethernet interface provides an RJ-45 connector for 10/100Base-T (UTP)
networks.

Connecting To The Network

To attach the ethernet interface to a network, plug the network cable into the
ethernet interface connector.
Watch the LEDs in the rear of the printer as they cycle through the power-on
self-test. When the test is complete, the STAT LED will begin to flash.
A
Network Connector
Figure 2. Interior View of the Cabinet Model Showing Network Interface Location and Setup
Installation And
Configuration
19