Iseries Configuration, Ascii Printer; Overview - InfoPrint 6500 Series User Manual

6

Overview

This chapter details a complete iSeries configuration setup including:
•
Developing Line Descriptions with CRTLINETH
•
Configuring the iSeries for TCP/IP
•
Configuring the iSeries for Printing
•
Verifying Printing from the iSeries
This document assumes no iSeries printer configuration has been done. If
any configuration has been done, please follow the procedure to the point at
which continued configuration is required.
Developing Line Descriptions With CRTLINETH
For each LAN adapter on the iSeries, a line description needs to be created
for the ethernet.
If a line description already exists, make sure the SSAP list includes default
options "AA" and "12." You must also know the LAN speed for the iSeries LAN
adapter.
NOTE: To change a line description, you need to vary the line off before
To change an existing line description, use the CHGLINETH command. To
create a line description, use CRTLINETH.
NOTE: SSAPs of "AA" and "12" are automatically set as default values in the
iSeries Configuration,
ASCII Printer
making the change. After making the change, you need to vary the
line back on.
line description when "*CALC" is used in creating new line
descriptions. You do not need to set these values unless they have
been changed.
109