Radio Frequency Statements - InfoPrint 6500 Series User Manual

15
Radio Frequency
Statements
RF Exposure
To comply with FCC and IC RF exposure requirements, the device is
approved for operation with a minimum separation distance of 20cm for
all persons.
Co-location
To comply with FCC part 15C and IC RSS 210 requirements, the device
must not be co-located or operating in conjunction with any other
transmitter or antenna other than those allowed by InfoPrint Solutions
Company for this device.
Antenna
Removal or alteration of the antenna could void FCC and IC approvals
and negate your authority to operate the product.
This wireless device may cause radio wave interference during operation.
OPERATING INSTRUCTIONS UNDER WHICH THE
RADIOCOMMUNICATION EQUIPMENT ARE EXEMPTED FROM
LICENSING
To maximize frequency sharing while minimizing radio interference, the
following operating conditions are imposed to confine the propagation of radio
signals within a building or at a localized site.
1. The radiocommunication equipment shall be used for in-building or
localized on-site operations;
2. The radiocommunication equipment shall operate at frequencies or
frequency bands designated by IDA on non-exclusive basis;
3. The radiocommunication equipment shall not operate beyond maximum
permissable output power designated by IDA to confine the propagation
of radio signals to a small localized area;
213