InfoPrint 6500 Series User Manual page 115

The following parameter values are required:
Remote System( RMTSYS)
Enter the hostname of your printer or *INTNETADR, which then prompts you
to specify the IP address of your printer.
Printer Queue (PRTQ)
Set to 'd1prn' through 'd8prn'. The remote printer queue name must be
in lowercase letters, entered in single quotes.
NOTE: When the IPDS feature is installed, queue name 'd4prn' is not
available.
Spooled File (FILE)
Enter the name of the spooled file you are printing. Additional values that may
need to be filled in are Job Name, User, and Number.
Destination Type (DESTTYP)
Specify *OTHER for the DESTTYP parameter.
Transform (TRANSFORM)
Specify *YES.
Manufacturer Type and Model (MFRTYPMDL)
Select a manufacturer type and model. This is the name of the WSCO. Select
*IBM6400 or *IBM42023 for Proprinter Emulation or *IBM6400EP for Epson
Emulation. Refer to MFRTYPMDL on page 118 for additional details.
Internet Address (INTNETADR)
The IP address of the ethernet.
NOTE: You may specify either *INTNETADR (and the ethernet IP address)
or the hostname for the ethernet (if you added the printer to the host
table entry as directed in "Configuring A TCP/IP Host Table Entry" on
page 113).
Setting Up Printing For ASCII Files
115