Email Address - InfoPrint 6500 Series User Manual

Ethernet interface
Hide thumbs Also See for 6500 Series:
Table of Contents

Advertisement

Chapter
3
SNMP Configuration
Syslog Alert Posting Settings
Figure 21. SNMP Syslog Alert Posting Configuration
Specifies whether alerts from the enabled alert group categories for this
configuration will be sent to the Unix syslog daemon. If this option is enabled,
the syslog daemon IP address must be entered in the syslog field in the
System Information section of the Administration Configuration form.
Email Alert Posting Settings
Figure 22. SNMP Email Alert Posting Configuration
Specifies whether alerts from the enabled alert group categories for this
configuration will be sent to the specified e-mail address. If this option is
enabled, the following information must be entered:

Email Address

Specifies an e-mail address to which alert information will be sent.
Short E-mail Format
Specifies whether a short (15-80 character) alert e-mail message should be
sent.
If enabled, the message will contain the alert description, the severity level,
the device description, and device name (unless the length of the message
exceeds the Short E-mail Message Length, in which case the message will be
truncated).
60

Advertisement

Table of Contents
loading

This manual is also suitable for:

6500-v

Table of Contents