InfoPrint 6500 Series User Manual page 202

Chapter 13
Complete Command List
If power-save is disabled (time is set to zero), "normal (power-save off)"
displayed.
<key-num> is the number identifying one of the four encryption keys, starting
from one. Encryption is disabled if "Encryption disabled" displayd.
<auth-method> is the authentication method e.g. open, shared, kerb, leap.
<auth-user-name> is the authentication method user name.
<auth-password> is the authentication method password.
<power> is a percentage indicating the approximate fraction of fullpower.
<option-list> is a list of options that are enabled (disabled options are not
shown).
<profile> is the 802.11g/b wireless mode in use.
<wpa-mode> is the WPA wireless mode selected.
<wpa-cipher> is the selected WPa cipher setting.
<wpa-passphrase> is the WPA passphrase represented as * characters if
configured.
<country-code> is the currently configured country setting that is used to
determine valid channel settings with which the 802.11g wireless NIC is used
to communicate with an access point.
<status> is the current access point association status ("disassociated" or
"associated with <MAC address>")
<comms-quality> indicates the strength or quality (in percent) of the wireless
signal.
NOTE: The "list stored ifc" command does not display the "Status" or
list kerberos
For Wireless NIC with Symbol RF cards only.
list key
List the license details and license key number.
list logins
List any active user logins on the NIC.
list logpath [logpath]
List the current logpath settings (e.g., names and mapped destinations).
list model [model]
List the current model settings (e.g., names and mapped destinations).
With no model parameter, a table of values for name, type, banner, config
and the size in bytes of header and trailer are shown for all models m1
through m8. When the model parameter is supplied, the specific bytes
used in the header and trailer are shown, along with the banner type, data
type and configuration number for that specific model.
202
"Quality" lines.