Configuring An Iseries Tcp/Ip Interface With Addtcpifc - InfoPrint 6500 Series User Manual

Configuring An iSeries TCP/IP Interface With
ADDTCPIFC
NOTE: Do not enter the IP address of the ethernet. Do not set the iSeries
Configuring An Interface For Ethernet
ADDTCPIFC is used to add a TCP/IP interface to iSeries. This step configures
the iSeries for attachments to a TCP/IP network.
1. At the iSeries command line, enter the following command:
ADDTCPIFC INTNETADR ('9.99.15.188') LIND(ETHLAN)
SUBNETMASK('255.255.255.0')
2. Figure 39 displays in bold the parameters you need to specify.
Type choices, press Enter.
Internet address
Line description
Subnet mask
Alias name
Associated local interface
Type of service
Maximum transmission unit
Autostart
PVC logical channel identifer + for more values
X.25 idle circuit timeout
X.25 maximum virtual circuits
X.25 DDN interface
TRLAN bit sequencing

Configuring An iSeries TCP/IP Interface With ADDTCPIFC

interface address to the same address as the ethernet IP address.
Also, do not add the ethernet to the iSeries TCP/IP interface list.
Add TCP/IP Interface (ADDTCPIFC)
Figure 39. Example ADDTCPIFC Interface
(Enter IP Address)
Name, *LOOPBACK...
*NONE
*NONE
*NORMAL *MINDELAY, *MAXTHRPUT...
*LIND 576-16388, *LIND
*YES *YES, *NO
001-FFF
60 1-600
64 0-64
*NO *YES, *NO
*MSB *MSB, *LSB
125