InfoPrint 6500 Series User Manual page 27

Wireless Ethernet Configuration Using The Control Panel
LEAP Parameters
LEAP wireless security scheme is available when the Cisco Aironet 350 radio
card is installed. The Cisco LEAP allows for a WEP key timeout that forces re-
authentication, resulting in the derivation of a new WEP key for the session.
•
Authentication Method.
This feature allows the user to select the authentication method used for the
wireless network interface.
•
Open (the default). Selects open authentication.
•
Shared. Selects shared key authentication.
•
Kerberos. Selects Kerberos authentication (for use when a Symbol
RF card is installed).
•
LEAP. Selects LEAP authentication (for use with a Cisco RF card
installed).
•
LEAP Username
•
LEAP Username (01-15). The first 15 characters of the LEAP user
name (maximum number of characters is 32).
•
LEAP Username (16-30). Characters 16 to 30 of the LEAP user
name (maximum number of characters is 32).
•
LEAP User (31-32). Characters 31 to 32 of the LEAP user name
(maximum number of characters is 32).
•
Reset LEAP User
Resets the LEAP user name to an empty string.
•
LEAP Password
•
LEAP Password (01-15). The first 15 characters of the LEAP
password (maximum number of characters is 32).
•
LEAP Password (16-30). Characters 16 to 30 of the LEAP password
(maximum number of characters is 32).
•
LEAP Password (31-32). Characters 31 to 32 of the LEAP password
(maximum number of characters is 32).
•
Reset LEAP Password
Resets the LEAP password to an empty string.
27