Active Emulation
This parameter allows you to select either of the following emulations:
v ANSI Emulation (the default).
v IGP. See "IGP Emulation Menu" on page 151.
v Code V. See "Code V Emulation Menu" on page 157.
v IPDS.
ASCII Printer Emulation
This parameter selects one of the following ASCII printer emulations as the active
emulation:
v pSeries Emulation (the default)
v pSeries XQ Emulations
v Serial Matrix Emulation
v Proprinter III XL Emulation
v Epson Emulation
The configuration for the active emulation is selected from the Printer Emulation
Configuration menu, described in "Emulation Configuration Menu" on page 133.
Printer Emulation Configuration
This parameter configures the ASCII printer emulation and page formatting. The
submenus are described in "Printer Emul Config Menu" on page 166).
Print Format
This parameter configures page formatting. The submenus are described beginning
in "Print Format Menu" on page 181.
IPDS Feature
Configuration
Matching printer operational settings to those of the host computer is known as
"printer configuration". The settings, or configuration parameters, such as selecting
the host interface, are adjusted according to the operator panel key descriptions.
Configure the IPDS in the same way you would configure the printer for other
features.
You can select IPDS default parameters directly from the operator panel as
explained in this chapter, or by application commands as explained in the InfoPrint
6500 IPDS Programmer's Reference Manual.
134
InfoPrint 6500-V User's Manual