Dataproducts Parallel Interface; Dataproducts Parallel Interface Connector Pin Assignments (With A 50-Pin Amp Hdh-20 Data Cable Connector) - InfoPrint 6500-v05 User Manual

Dataproducts Parallel Interface

The Dataproducts parallel interface allows the printer to operate with a 50-pin
Amplimite (AMP) HDH-20 data cable connector. This adapter can be obtained as a
feature on the InfoPrint 6500. The length of the data cable from the host computer
to the printer must not exceed 40 feet (12 meters).
Table 8. Dataproducts Parallel Interface Connector Pin Assignments (with a 50-pin AMP HDH-20 Data Cable
Connector)
Input Signals
Signal
DATA LINE 1
Return
DATA LINE 2
Return
DATA LINE 3
Return
DATA LINE 4
Return
DATA LINE 5
Return
DATA LINE 6
Return
DATA LINE 7
Return
DATA LINE 8
Return
DATA STROBE
Return
PAPER INSTRUCTION
Return
BUFFER CLEAR
Return
200
InfoPrint 6500-V User's Manual
Output Signals
Pin Signal
19 READY
3 Return
20 ONLINE
4 Return
1 DEMAND/DATA REQ.
2 Return
41 PARITY ERROR
40
34
18
43
42
36
35
28
44
38
37
30
14
31
15
Note: Pins not listed are not connected
Miscellaneous
Pin Signal
22 CABLE VERIFY
6
21 GROUND
5
23
7
27
11
Pin
45, 46
39