D-Link xStack Reference Manual page 1082

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
RADIUS server
successfully .This egress
bandwidth will be
assigned to the port.
802.1p default priority
assigned from RADIUS
server after RADIUS client
is authenticated by
RADIUS server
successfully. This 802.1p
default priority will be
assigned to the port.
Failed to assign ACL
profiles/rules from
RADIUS server.
802.1X 802.1X Authentication
failure.
802.1X Authentication
successful.
A host fails to pass the
MAC-based authentication
Access Control
The authorized user
number on a port reaches
the max user limit.
The authorized user
number on a port is below
the max user limit in a
time interval(interval is
project depended).
The authorized user
number on whole device
reaches the max user
limit.
The authorized user
number on whole device
is below the max user limit
in a time interval(interval
is project depended).
A host passes the
authentication
A host is aged out
JWAC When a client host
authenticated successful.
When a client host fails to
authenticate.
This log will be triggered
when the number of
authorized users reaches
the maximum user limit on
the whole device.
This log will be triggered
when the number of
authorized users is below
the maximum user limit on
(account: <username>)
RADIUS server <ipaddr>
assigned 802.1p default
priority:<priority> to port
<[unitID:]portNum> (account :
<username>)
RADIUS server <ipaddr>
assigns <username> ACL failure
at port <[unitID]portNum>
(<string>)
802.1X Authentication failure [for
<reason> ] from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr> )
802.1X Authentication
successful from (Username:
<username>, Port:
<[unitID:]portNum>, MAC:
<macaddr>)
MAC-based Access Control
unauthenticated host(MAC:
<macaddr>, Port
<[unitID:]portNum>, VID: <vid>)
Port <[unitID:]portNum> enters
MAC-based Access Control stop
learning state.
Port <[unitID:]portNum> recovers
from MAC-based Access Control
stop learning state.
MAC-based Access Control
enters stop learning state.
MAC-based Access Control
recovers from stop learning
state.
MAC-based Access Control host
login successful (MAC:
<macaddr>, port:
<[unitID]portNum>, VID: <vid>)
MAC-based Access Control host
aged out (MAC: <macaddr>,
port: <[unitID]portNum>, VID:
<vid>)
JWAC authenticated user
(Username: <string>, IP: <ipaddr
| ipv6address>, MAC:
<macaddr>, Port: <[unitID:]
portNum>)
JWAC unauthenticated user
(User Name: <string>, IP:
<ipaddr | ipv6address>, MAC:
<macaddr>, Port:
<[unitID:]portNum>)
JWAC enters stop learning state.
JWAC recovers from stop
learning state.
1077
Informational
Warning
Warning
Informational
Critical
Warning per port
Warning per port
Warning per system
Warning per system
Informational
Informational
Informational
Warning
Warning per system
Warning per system