Pci Bus# (0/1) Error Detected / Pci Bus# (0/1) Host Bridge Controller Error / Pci Error Messages Received From Bus#0-Device# (0/1); Collate Full - Xerox Phaser 6500 Service Manual

Error Messages and Codes
PCI Bus# (0/1) Error Detected / PCI Bus# (0/1) Host Bridge Controller Error
/ PCI Error Messages received from Bus#0-Device# (0/1)
Applicable Error Codes

Collate Full

Applicable Error Code
3-162
• 116-361 / 116-362 / 116-363 / 116-366 / 116-368 / 116-369
Troubleshooting Reference Table
Applicable Parts
IP Board (ESS) (SFP PL8.1.7; MFP
■
PL8.1.2)
Troubleshooting Procedure
Step Actions and Questions
1 Cycle the power Off, then On.
Does the error still occur?
• 116-721
Troubleshooting Procedure
Step Actions and Questions
1 Cycle the power Off, then On.
Does the error still occur?
2 Check RAM Disk size settings.
Does the error occur when printing
after reducing the size setting of the
RAM Disk?
Xerox Internal Use Only
http://www.manuals4you.com
Wiring and Plug/Jack Map References
■
Yes
Replace the IP
Board. (SFP,
page 8-120;
MFP,
page 8-144)
Yes
Go to step 2.
Split the
document into
blocks to
decrease the
number of
pages to be
collated.
Phaser 6500/WorkCentre 6505 Service Manual
No
Complete.
No
Complete.
Complete.