Exit Sensor - Xerox Phaser 6000 Service Manual

Troubleshooting

Exit Sensor

1. Enter Service Diagnostics (page 4-11).
2. Run the Exit Sensor test: Engine Diag > Sensor Test > Exit Sensor.
3. Operate the actuator to check sensor function.
4. Confirm the number shown on the display increases every time the actuator is
operated.
5. Press the Cancel button to stop the test.
Actuator Exit Sensor
Paper
Paper
s6000-143
Phaser 6000/6010 and WC 6015 MFP Xerox Internal Use Only 4-23