Ribbon Load - Intermec EasyCoder E4 User Manual

Chapter 3 Operation

Ribbon Load

1
1
Open the side and front covers.
20
The EasyCoder E4 can print on labels, tickets, tags, and con-
tinuous stock using either direct thermal printing on special
heat-sensitive media or thermal transfer printing using a special
ink-coated ribbon. The EasCoder E4 LinerLess printer is not
fi tted with any transfer ribbon mechanism.
Thermal transfer printing makes it possible to use a wide range
of receiving face materials. Make sure to select a type of ribbon
that matches the type of receiving face material (see Appendix
2, "Media Specifi cation") and to set up the printer properly (see
Chapter 4, "Printer Setup").
Most transfer ribbons do not smear at room temperature.
2
2
Raise the pinthead and remove any used ribbon and
the empty ribbon core. Keep the empty core for used
with the next ribbon load.
Intermec EasyCoder E4 – User's Guide
2
1