Installation; Unpacking - Intermec EasyCoder E4 User Manual

Installation

Unpacking

Intermec EasyCoder E4 – User's Guide
Before you install the printer, examine the package for possible
damage or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
• Check the label on the printer's rear plate, which gives the
voltage, the part number, and the serial number.
• Check that any options you ordered are included.
• Check that all the accessories are included. As standard, the
box contains:
- Intermec EasyCoder E4 printer
- Power cord
- Parallel interface cable
- Quality check card
- Cleaning card
- Starter pack of labels
- Starter pack of thermal transfer ribbon (not LinerLess
model)
- Set of manuals
- Supporting software and product information on CD.
• Check that the power cord is appropriate for the local stan-
dard.
European-type
230 VAC plug
If the printer has been damaged in any way during transporta-
tion, complain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.
US/Canadian-type
115 VAC plug
Chapter 2
GB-type
230 VAC plug
7