Unpacking The Printer - Intermec EasyCoder PX4i User Manual

Chapter 2 — Installation

Unpacking the Printer

6
Before you install the printer, unpack and examine it for possible
damage or missing parts.
To unpack the printer
1 Open the box and lift the printer out.
2 Check that the printer has not been visibly damaged during
transportation. Keep the packing materials in case you need to
move or reship the printer.
3 Check the label on the printer's rear plate, which gives the
voltage, the part number, and the serial number.
4 Check that any options you ordered are included.
5 Check that all the accessories are included.
6 Check that the type of power cord is appropriate for the local
standard. The printer works within 90 to 265 VAC, 50 to 60
Hz.
7 If the printer has been damaged in any way during
transportation, report the damage to the carrier immediately.
8 If the delivery is incorrect or any parts are missing, report it
immediately to the distributor.
EasyCoder PX4i User's Guide (IPL Version)