Platen Store Mode - Konica Minolta 7033 Instruction Manual

Section 7 : Other Basic Functions

Platen Store Mode

Use the Platen store mode for originals that cannot be fed through the document feeder
due to thickness, size or condition.
When scanning thick originals that require keeping the RADF open, select Non image
area erase to prevent exposure of the glass area around the border of the original. This
feature ensures a clean copy result, and reduces toner consumption. The Non image
area erase mode automatically releases when the RADF is closed. Additional images
may be scanned.
Procedure
z Set Copying Conditions
Make required copying selection, and select 1s1 or 1s2 copy mode.
When selecting any of the Applications, check that the " Store Mode " key on the
Application Selection screen is highlighted. If not, touch the key to highlight it. Touch
" OK " to return to the Basic screen.
Please Be Reminded!
When using Store mode with application functions, be sure to touch and highlight the
"Store Mode" key on the Application Selection screen; otherwise the copier will not
start scanning even though the "SCAN" key is touched.
7 - 4
Application Selection screen
1. Store Mode (continued)