Finisher - Konica Minolta 7033 Instruction Manual

Section 3 : Component Locations

3. Finisher

3. Finisher
qFinisher upper tray
tRelease lever
wStaple drive portions
eFinisher middle tray
rFinisher lower tray
yCartridge holders
q Finisher upper tray ejects copy paper in Non-sort mode.
w Staple drive portions staples the exit set in Non-sort, Sort, Group or Staple-sort mode.
e Finisher middle tray ejects copy paper in Non-Sort, Sort, Group, or Staple-sort mode.
r Finisher lower tray ejects copy paper in Non-Sort, Sort, Group, or Staple-sort mode.
t Release lever releases the Finisher from the main body when clearing misfed paper or
supplying staples.
y Cartridge holders hold staple cartridges to be replace when supplying staples.
3 - 6