Konica Minolta 7033 Instruction Manual page 106

Section 7 : Other Basic Copying
v Start Copying
Press the START PRINT button. Each original will be
scanned and then copied.
In some cases, originals loaded on the RADF are all
scanned and discharged, then printing job starts in
succession.
Having Problems?
The memory may be fully loaded to cause overflow during
scanning. See p. 12-4 to p. 12-5.
To stop printing, press the STOP/CLEAR button. This action
also clears all the scanned data.
After completion of copying, all the data in the memory is
cleared. Press the AUTO RESET button to return to the
initial condition.
3. Image Quality (continued)
ERROR
POWER SAVER
ON / OFF
2 3
INTERRUPT
5 6
STOP / CLEAR
8 9
0
CLEAR QTY. START PRINT
7 - 19
Image Quality