Power Saver - Konica Minolta 7033 Instruction Manual

Section 8 : Special Copying : Page Editing
Supplement 2: Checking copying conditions/printed copies
1. Press the CHECK button to display the Check screen.
2. Check the current copying conditions on the Check screen.
3. Touch "
PROOF COPY " key on the Check screen to make a proof copy.
When completed, touch " EXIT " key to return to the Basic screen.
See p. 7-22 to p. 7-27 for details.
m Start Copying
Press the START PRINT button. Originals loaded on RADF are
all scanned and discharged, then output job starts in succession.
When using Store mode, press the START PRINT button to
start the output job.
To stop copying, press the STOP/CLEAR button. Scanned data
in the memory will be cleared.
After completion of copying, all the data in the memory will be
cleared.
Having Problems?
The memory may be fully loaded to cause overflow during scanning. See p. 12-4 to p.
12-5.
Having Problems?
If paper of the same size as that loaded in Tray 1 is not loaded in other trays, the
message "Please load A4 paper in Tray 2, 3, or 4" will be displayed. (The paper size
displayed is the size which is loaded in Tray 1.) Load paper of the same size as that
loaded in Tray 1 in any other tray, then press the START PRINT button.
CAUTION: Paper Capacity of the Finisher
The capacity of the Finisher exit tray is listed below. When the total number of
copies in the copy run exceeds the stated capacity, be sure to unload the exit
tray whilst the copier is still copying. Failure to do so will cause the copier to
jam.
The following capacity is for 80g/m
the capacity will be less than the following.
Non-sort mode
Tray 1: 100 sheets/ 10 sheets (thin/thick paper, OHP films, etc.)
Tray 2/3: 500 sheets (A4R, A4, B5R, B5, 8.5"x11"R)
300 sheets (A3, B4, F4/8.5"x13", A5R)
Sort/Group mode
Tray 2/3: 500 sheets (A4R, A4, B5R, B5, 8.5"x11"R)
300 sheets (A3, B4, F4/8.5"x13")
Staple-sort mode
500 sheets max. (A4R, A4, B5R, B5, 8.5"x11"R)
300 sheets max. (A3, B4, F4/8.5"x13", A5R)
8 - 12
2. Sheet/Cover Insertion (continued)
2
5
8
0
2 paper. When copying mixed size originals,
ERROR

POWER SAVER

ON / OFF
3
INTERRUPT
6
STOP / CLEAR
9
CLEAR QTY. START PRINT