Konica Minolta 7033 Instruction Manual page 134

Section 8 : Special Copying : Page Editing
Front Cover Mode (Front copy and Front blank)
q Front cover mode (Front copy)
7 8
5 6
3 4
1 2
SURVEYOR'S
REPORT
Originals
(1) Touch and reverse " FRONT COPY " or " FRONT BLANK " key. When not placing a front
cover, do not reverse these keys.
(2) Touch " TRAY1 " or " BYPASS " key to select the tray from which the front/back cover
is fed.
(3) To use thick paper for the front cover, touch and reverse " THICK PAPER " key.
" BYPASS " key is automatically selected. If Back Cover Mode is also selected in the
same job, the back cover will be thick as well.
Advice
To void the selection, touch "
restored.
(4) To select Back Cover mode, see p. 8-8.
(5) To select Insertion mode, see p. 8-9 to p. 8-10.
(6) Touch " OK " key on the Sheet/Cover Insertion Mode Selection screen to return to the
Application Selection screen. Proceed to step 5 on p. 8-10.
Sheet/Cover Insertion Mode Selection screen
(FRONT COPY)
Sheet/Cover Insertion Mode Selection screen
(No selection)
9 10
10
8 9
6 7
4 5
2 3
1
SURVEYOR'S
REPORT
Copies
" key. The Application Selection screen will be
CANCEL
2. Sheet/Cover Insertion (continued)
w Front cover mode (Front blank)
9 10
7 8
5 6
3 4
1 2
SURVEYOR'S
SURVEYOR'S
REPORT
Originals
Sheet/Cover Insertion Mode Selection screen
(FRONT BLANK)
Sheet/Cover Insertion Mode Selection screen
(Thick paper)
10
9
7 8
5 6
3 4
1 2
REPORT
Copies
8 - 7
Sheet/Cover
Insertion