Copying Using Memory; To Scan Originals Into Memory (Store Mode) - Konica Minolta 7045 Instruction Manual

Copying Using Memory

This section describes various copying features available on this machine using built-
in memory.
I To Scan Originals into Memory (Store Mode)
Store mode allows you to scan all the originals first,
then to start continuous printing job.
Use RADF store mode for scanning large amount of
originals.
Use Platen store mode for originals that cannot be fed
through the document feeder due to thickness, size or
condition.
❒ Incompatible Condition: Image Insert
1
Press
APPLICATION
2
Store Mode
Touch
Selection Screen to highlight it.
3
Make additional application selections,
as desired.
4
Touch
sic Screen.
5
Select additional copy conditions, as
desired.
3-20
on the control panel.
on the Application
OK
to return to the Ba-
RADF capacity is 50; how-
ever, more than 50 originals
can be scanned into memory
using RADF store mode.
Please Be Reminded! Please Be Reminded!
When starting a new copying
job, be sure to close the RADF
securely, then press
AUTO RESET
.