Krds Host [15] - Konica Minolta 7033 Instruction Manual

Section 11 : Key Operator Mode

16. KRDS Host [15]

When activated, the Remote Diagnostics option is automatically monitored by a Konica
service representative. In case of machine trouble, select the KRDS host option. Your
service representative will contact you to determine the appropriate means for resolving
the problem.
Setting options: Call for JAM; SC; No toner; No paper; Copy quality; Other reason
Key Operator Mode screen 1
Procedure
1. While pressing HELP button, turn power ON. Enter a 4-digit key operator password,
then touch " OK " to display the Key Operator Mode screen.
Advice
If an invalid Key operator password is entered, continue by entering the valid 4-digit
password.
2. To display menus
arrow key.
3. Touch "
15. KRDS host " to display the KRDS Host Menu screen.
4. Touch "
1. JAM ", " 2. SC ", " 3. NO TONER ", " 4. NO PAPER ", " 5. COPY QUALITY ", or
" 6. OTHER REASON ".
The Start Call Screen will be displayed.
5. Touch "
START " to call remote service representative.
6. If no further changes are required, proceed to step 8 .
7. If other key operator settings are required, touch "
Operator Mode screen.
8. Turn power OFF.
9. Turn the copier power switch back ON to perform copying operations.
11 - 50
Key Operator Mode screen 2
[11] to [15] of the Key Operator Mode screen, touch the
16. KRDS Host [15]
KRDS Host Menu screen
Start Call screen
RETURN " to restore the Key
Lower