Konica Minolta 7033 Instruction Manual page 15

Section 1 : Precautions for Installation and Use
Sort/Group Mode
Tray 2/3: 500 sheets (A4R, A4, B5R, B5, 8.5"x11"R)
300 sheets (A3, B4, F4/8"x13")
Staple-Sort Mode
500 sheets max. (A4R, A4, B5R, B5, 8.5"x11"R)
300 sheets max. (A3, B4, F4/8"x13", A5R*)
*: Load A5 in horizontal feed (
CAUTION: Finisher Operation
DO NOT INSERT your finger into the two staple driving portions or into the grooves of the
paper exit lever, otherwise you may be injured.
DO NOT PUT your hands beneath or above the middle exit tray of the Finisher when it is
moving, otherwise you may be injured.
CAUTION: Clearing Wedged Staples
Please be careful when clearing wedged staples since it may cause injury.
CAUTION: Paper Capacity for the Exit Tray
The exit tray capacity is 100 sheets. If a copy run of more than 100 is required, be sure to
remove the copies from the exit tray before the maximum capacity is reached. Failure to do
so will cause the copier to jam.
CAUTION: Power Saver and Weekly Timer
• During Power Saver mode the copier is still connected to the mains power supply and
power is still applied to certain areas of the machine. To avoid any unexpected troubles
turn the power OFF when not using the copier for long periods of time.
• When the Weekly Timer indicator is lit, turning power OFF will disable weekly timer function.
CAUTION: Fixing Unit
The Fixing unit is internally very hot. To avoid getting burned, DO NOT TOUCH. Be careful
when withdrawing the fixing unit.
CAUTION: Drum Unit
The drum unit has a high voltage generated.
To avoid an electrical shock, DO NOT TOUCH.
CAUTION: ADU Guide Plate
The ADU guide plate is not latched when raised. Do not release it, otherwise the ADU guide
plate will slam shut and may cause injury.
3. Requirements for Safe Use (continued)
) only.
Precaution for
Installation
and Use
1 - 9