Copy Mode; 1S2 Copying - Konica Minolta 7033 Instruction Manual

Section 6 : Basic Copying on Basic Screen

3. Copy Mode

Under the copying conditions of the Basic screen, the Copy mode is automatically set at
"1s1".
Take the following procedure to set the copy mode.

1s2 Copying

Single-sided originals are automatically copied onto both sides of the paper.
Basic rules for 1s s s s s 2 copying mode
Place the originals onto the RADF. When making double-sided copy using the platen
glass, see "1s2 Copying by Using the Platen Glass" (p. 6-20 to p. 6-23).
1s2 Copying Specifications
RADF to be used
RADF capacity
Original
Copy paper
Print quantity
Advice
*: A5 is available in horizontal feed (
Incompatible
Image quality (Very high)
OHP interleave
7033
7033
7033
7033
7033
1-sided originals
: 50 sheets max. 1,500 image max. can be scanned at a time
using RADF store mode.
: A3, B4, A4R, F4/8.5"x13", A4, B5R, B5, A5R*, 8.5"x11"
2
(60 to 90g/m paper)
: A3, B4, A4R, F4/8.5"x13", A4, B5R, B5, A5R*, 8.5"x11"R,
8.5"x11" (80g/m 2
: 999 sets max.
) only.
Thin/Thick paper
Duplex copying
paper recommended)
3. Copy Mode
Basic
Operation
Copy Mode
6 - 11